EDR-8010 SERIES
8 FE copper and 2 GbE SFP multiport industrial secure router with firewall/NAT, 12/24/48 VDC input voltage, -10 to 60°C operating temperature
8 FE + 2 Gigabit port all-in-one firewall/NAT/VPN/router/switch
Visualize OT security with the MXsecurity management software
Secure remote access tunnel with VPN
Examine industrial protocol data with Deep Packet Inspection (DPI) technology
Easy network setup with Network Address Translation (NAT)
RSTP/Turbo Ring redundant protocol enhances network redundancy
Security features based on IEC 62443/NERC CIP
Supports secure boot for checking system integrity
-40 to 75°C operating temperature range (-T model)
Visualize OT security with the MXsecurity management software
Secure remote access tunnel with VPN
Examine industrial protocol data with Deep Packet Inspection (DPI) technology
Easy network setup with Network Address Translation (NAT)
RSTP/Turbo Ring redundant protocol enhances network redundancy
Security features based on IEC 62443/NERC CIP
Supports secure boot for checking system integrity
-40 to 75°C operating temperature range (-T model)
Input/Output Interface
- Alarm Contact Channels: Resistive load: 1 A @ 24 VDC
- Buttons: Reset button
- Digital Input Channels: +13 to +30 V for state 1 -30 to +3 V for state 0 Max. input current: 8 mA
Ethernet Interface
- 10/100BaseT(X) Ports (RJ45 connector): 8
- 1000BaseSFP Slots: 2
- Standards: IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) IEEE 802.3z for 1000BaseSX/LX/LHX/ZX IEEE 802.3x for flow control IEEE 802.1Q for VLAN Tagging IEEE 802.1X for authentication Static Port Trunk
- DMZ: User-configurable DMZ ports
Ethernet Software Features
- Broadcast Forwarding: IP directed broadcast, broadcast forwarding
- Management: Back Pressure Flow Control DDNS DHCP Server/Client Web Console (HTTP/HTTPS) LLDP QoS/CoS/ToS SNMPv1/v2c/v3 Telnet TFTP HTTPS SSH
- Redundancy Protocols: RSTP STP Turbo Ring v2 Turbo Chain
- Routing: Throughput: 50K packets per second (max. 500 Mbps)
- Routing Table: Max. 4K routing rules
- Concurrent Connections: Max. 120K (based on RFC 3511)
- Connections Per Second: Max. Max. 6K (based on RFC 3511)
- Routing Redundancy: VRRP
- Security: Secure Boot IPsec L2TP (server) RADIUS Trust access control TACACS+
- Time Management: NTP Server/Client SNTP
- Unicast Routing: OSPF RIPV1/V2 Static Route
- Multicast Routing: Static Route
- Filter: IGMP v1/v2/v3
- Routing Throughput: Max. 50K packets per second / 500 Mbps (based on RFC 2544)
Switch Properties
- VLAN ID Range: VID 1 to 4094
- IGMP Groups: 256
- Max. No. of VLANs: 16
LED Interface
- LED Indicators: PWR1, PWR2, STATE, MSTR/H.TC, CPLR/T.TC, VRRP/HA, VPN, USB
DoS and DDoS Protection
- Technology: ARP-Flood FIN Scan ICMP Flood TCP Sessions Without SYN NMAP-ID Scan NMAP-Xmas Scan Null Scan SYN/FIN Scan SYN/RST Scan SYN-Flood Xmas Scan
Firewall
- Filter: DDoS Ethernet protocols ICMP IP address MAC address Ports
- Stateful Inspection: Router firewall Transparent (bridge) firewall
- Deep Packet Inspection: Modbus TCP Modbus UDP DNP3 IEC 60870-5-104 IEC 61850 MMS EtherNet/IP Omron FINS Siemens S7 Comm. Additional protocols will be supported through future firmware updates.
- Throughput: Firewall:Max. 50K packets per second / 500 Mbps (based on RFC 2544)
- Intrusion Prevention System: Requires an additional license.
IPsec VPN
- Authentication: MD5 and SHA (SHA-256) RSA (key size: 1024-bit, 2048-bit) X.509 v3 certificate
- Concurrent VPN Tunnels: Max. 50 IPsec VPN tunnels
- Encryption: DES 3DES AES-128 AES-192 AES-256
- Protocols: IPsec L2TP (server) PPTP (client)
- Throughput: Conditions: AES-256, SHA-256Max. 25K packets per second / 200 Mbps (based on RFC 2544)
NAT
- Features: 1-to-1 N-to-1 Port forwarding NAT loopback
Real-Time Firewall / VPN Event Log
- Event Type: Firewall event VPN event
- Media: Local storage SNMP Trap Syslog server
Serial Interface
- Console Port: RS-232 (TxD, RxD, GND), 3-pin (115200, n, 8, 1)
- Connector: USB Type-C
Power Parameters
- Connection: Removable terminal block
- Operating Voltage: 9.6 to 60 VDC
- Input Voltage: 12/24/48 VDC, redundant dual inputs (DNV-certified for 24 VDC)
- Input Current: 0.53 A @ 12 VDC 0.26 A @ 24 VDC 0.14 A @ 48 VDC
- Reverse Polarity Protection: Supported
Physical Characteristics
- Housing: Metal
- Dimensions: 45 x 135 x 105 mm (1.77 x 5.31 x 4.13 in)
- Weight: 520 g (1.15 lb)
- Installation: DIN-rail mounting (DNV-certified) Wall mounting (with optional kit)
Environmental Limits
- Operating Temperature: -10 to 60°C (14 to 140°F)
- Storage Temperature (package included): -40 to 85°C (-40 to 185°F)
- Ambient Relative Humidity: 5 to 95% (non-condensing)
Standards and Certifications
- Safety: IEC 62368-1 UL 62368-1
- EMC: EN 55032/35
- EMI: CISPR 32, FCC Part 15B Class A
- EMS: IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV IEC 61000-4-3 RS: 80 MHz to 1 GHz: 20 V/m IEC 61000-4-4 EFT: Power: 4 kV; Signal: 4 kV IEC 61000-4-5 Surge: Power: 2 kV; Signal: 4 kV IEC 61000-4-6 CS: 10 V IEC 61000-4-8 PFMF
- Railway: EN 50121-4
- Traffic Control: NEMA TS2
- Maritime: IEC 60945 DNV
- Shock: IEC 60068-2-27
- Freefall: IEC 60068-2-32
- Vibration: IEC 60068-2-6
- Power Substation: IEC 61850-3 Edition 2.0 IEEE 1613
- Hazardous Locations: ATEX Class I Division 2 IECEx
MTBF
- Time: 1,347,225 hrs
- Standards: Telcordia (Bellcore), GB
Warranty
- Warranty Period: 5 years
- Details: See www.moxa.com/warranty